Suitable model: Hyundai Elantra moving model is suitable for lampshade.
Material: PC material, all imported German Bayer raw materials are more durable and brighter than the general ones.
Process: antioxidation treatment for high temperature curing of precision injection molding
Installation operation instructions of lampshade
1, hot air gun on the headlight sharp corner heating, heating to wear gloves to feel a little hot, stop! ( note: the temperature should not be too high to prevent damage to the headlight );
2 , the hot air gun is used to heat the gap of the whole headlight after the angle is slightly separated from the point where the hand grips the sharp corner with both hands ;
3, after the end of the heating, quickly grilled the corner, grilled hard ~ ~ (must be set with gloves, gloves can not drop hair, avoid excessive force);
4, everything is going smoothly and skillfully. From heating to picking up, a minute is enough. If it doesn't work well, continue to use hot air gun to heat the place where it is not separated, and the glue will soften, and the force will be easily removed.
5. clean the glue in the glue trough of the back shell as much as possible, put on the gloves, then remove the decorative frame on the lampshade and install it on the new lampshade;
6. Cover the glue we provide with sharp lid and cut the lid with scissors.Apply glue to the slot (the glue flow is too small to be shearing more) to ensure that the glue hits to half of the height of the glue sink to 2/3 (do not break the glue, as much as possible to ensure the height of the same; "..."
7, the new lampshade on the back shell, according to the found overflow of glue, can not deal with first, such as glue dry through, everything fell down with the blade, lampshade surface has glue, wipe with cloth, there is No.
Note: we recommend that you air dry in a ventilated environment for three days to five days before loading the car, and do not wash the car or rain in a week, so that water can not penetrate.
Lampshade installation method:
1, (1) if you have an oven, that is, as long as the demolition of the back cover, bulb lamp, and then put into the oven to 80 degrees Celsius, heating for 10 minutes, the glue is softened, and the shell lampshade can more easily separate;
(2) if you don't have oven, you have to use hot air gun, heat it in a section of the lampshade and shell glue section, soften it and insert it with a screwdriver. Don't force it too much, so as not to cause damage. According to this method, the entire lampshade and shell can be separated.
2, clean up the remaining glue in the glue tank of the shell as much as possible, and then put 703 glue on it, and glue it as evenly as possible, as long as the depth of the rubber grooves is 2/3.
3, the decoration frame on the old lampshade is dismantled, then the decoration frame is mounted on the new lampshade, and then the lamp cover is aligned with the glue slot.
After closing, place the whole lamp in a cool and dry place for 24 hours and then load it for 48-72 hours.
1. We accept payment by Credit Card, Bank Transfer and other payment that AE supports.
2. Please list your special requirements (color, packages, value of declaration, etc.) when placing the order, or leave a message to us.
1. Please be sure your shipping address is correct. Please leave us your available phone number. It is required by the Post Office of China when filling out the shipping form!!
2. Normally, we will FREE SHIP the package via seller's shipping methods. Please contact us if you want to ship by other shipping models, such as DHL, UPS, FedEx, EMS, etc. when placing the order.
All items will be delivered out within 7-30 business days.
By Airmail: 15-20 days to ASIA, Europe, North America
By DHL, UPS, FedEx: 3-5 business days to most of countries
We are not responsible for any custom duty or import tax.
RETURNS & WARRANTY:
1. We will check the item carefully before shipping.
2. If you are not satisfied with the item for any reason, please contact us. We will either send you a new one or refund the money as soon as we receive the returned item.
If you have a pleasant buying experience in our store, please leave a positive feedback for our products and services with 5-star rating.
Please feel free to contact us for any problem and give us a chance to solve it before leaving a negative feedback. Your understanding is highly appreciated
Packing code description